Victoria Arduino sales, installation and service

Victoria Arduino creates premium commercial espresso machines and grinders that unite distinctive Italian design with advanced technology. From the compact E1 Prima to the high-performance Black Eagle range, its equipment is designed for businesses that place coffee quality, consistency and visual impact at the centre of their operation.

Manufactured in Belforte del Chienti, Marche, Italy

Victoria Arduino equipment in use

Preferred Partner

Modern Standard Service is a Victoria Arduino Preferred Partner. We supply Victoria Arduino equipment and provide expert advice, installation, commissioning and ongoing technical support throughout the life of the machine.

Victoria Arduino equipment

We supply, install and support the full Victoria Arduino commercial range.

View all Victoria Arduino equipment

12 month parts & labour warranty

All new machines purchased from Modern Standard Service include a 12-month parts and labour warranty. Warranty support is provided subject to the manufacturer's terms, correct installation, appropriate water treatment and normal commercial use.

Built-in reassurance

  • Parts and labour includedCover for manufacturing faults for 12 months.
  • UK-based technical supportAccess to our experienced team, on the phone and on site.
  • Correct installation and water treatment requiredCover is subject to the manufacturer's terms, correct installation and appropriate water treatment.
  • Machine prices include installation and commissioning by our engineers.
  • The warranty is separate from a paid service plan and does not replace one.

Read warranty terms

London & the South East

Victoria Arduino servicing and repairs in London

Modern Standard Service is an official Victoria Arduino partner. We sell, install, service and repair Victoria Arduino espresso machines and Mythos grinders for specialty cafés, bakeries, restaurants and offices across London, Essex, Kent and Surrey, from our workshop in Harlow, Essex.

Breakdown repairs

Victoria Arduino not heating, losing pressure, leaking at the group or steam wand problems: our engineers diagnose on site and carry genuine parts wherever possible.

Planned maintenance

Gaskets, shower screens, valves and water treatment checked and replaced before they fail. Every Bronze, Silver and Gold plan includes a yearly preventative visit.

Workshop rebuilds

Boiler and group-head rebuilds at our Harlow workshop, pressure-tested before the machine goes back to site.

Pressure vessel inspections

PVI with written scheme of examination and certificate for £420 + VAT, or included every year on our Gold plan.

Water filter changes

Scale is one of the commonest causes of breakdowns. Silver and Gold plans include a water filter change every year.

New machines, installed

Replacing an old machine? Our Victoria Arduino prices include installation and commissioning, and the initial PVI is free.

Victoria Arduino models we work on

Running an older Victoria Arduino? Tell us the model and we'll confirm we can get the parts.

Where our engineers work

Engineers in London every day, plus Essex, Kent, Surrey and Sussex from our Harlow workshop. We also cover mainland Great Britain.

Expert support throughout your machine's life

Installation, commissioning, planned maintenance and responsive repairs from Victoria Arduino-trained commercial coffee equipment engineers.

  • Installation & commissioning

    We install the machine, connect water and drainage and commission it on site. Your team is shown how to run it before we leave.

  • Preventative maintenance

    Planned servicing, water treatment and replacement of wear parts, so faults are found before they stop service.

  • Breakdown repairs

    Diagnosis by engineers who know the equipment, with genuine parts and on-site repair wherever possible.

  • Parts & engineer expertise

    Genuine parts and engineers familiar with this manufacturer's equipment and the technology inside it.

About servicing Victoria Arduino equipment

Victoria Arduino's Eagle One range is built around precise, stable temperature control and genuine finish customisation — it's the machine behind some of the busiest multi-site coffee programmes we support. We supply, install and service the current Victoria Arduino range; this page covers what that servicing involves.

  • Eagle One — built for high-performance, high-volume service, with 2 and 3 group configurations
  • Eagle One Prima EXP PureBrew — a more compact single-group option for sites with less counter space, without giving up the temperature stability the Eagle One range is known for
  • Atom grinder — a compact espresso grinder built to pair with either machine

See the full Victoria Arduino range we supply.

Victoria Arduino machines are available in a wide range of finishes beyond standard black, white and stainless steel — we sell and support Eagle One machines in colours including Sparkling Coral and Blue Pearl. For operators wanting a fully bespoke colour to match a brand identity across multiple sites, our machine customisation service covers powder-coating and finish-matching in more detail — genuinely useful for multi-site groups standardising equipment look across an estate.

Eagle One machines are built around close temperature stability, which depends on the boiler and control electronics staying properly calibrated — not something you can judge from taste alone once it's drifted gradually. A Victoria Arduino service covers group seal condition, boiler descaling scaled to water hardness and volume, and checking the temperature control system is holding calibration rather than drifting under sustained volume.

As with any commercial machine, most Eagle One faults are preventable with a planned schedule — worn seals and scale build-up caught before they cause a pressure or heating fault. When something does go wrong, our engineers carry genuine parts wherever possible and aim to fix on site first time; where a deeper repair is needed, the machine comes into our workshop for a proper rebuild and pressure test before it goes back to site.

We use genuine Victoria Arduino parts on every repair and service, and our engineers are trained on both the Eagle One's multi-group configurations and the Prima EXP's more compact build.

We service Victoria Arduino machines across London and UK-wide. See our London servicing page or areas we cover for the full picture, including support for multi-site groups running Eagle One machines across several locations.

Our Bronze, Silver and Gold service packages cover Victoria Arduino machines with contracted response times, preventative maintenance visits and — on Gold — an annual PVI safety check. Speak to our service team to set up a plan, or book a repair if your machine needs attention now.

London & UK-wide coverage

On-site support across London and the South East from our Harlow base, and throughout mainland Great Britain.

Our service areas

Service plans

Choose the right level of cover for your business. Our Bronze, Silver and Gold plans combine preventative servicing with engineer support.

Victoria Arduino equipment serviced by Modern Standard Service
  • Bronze

    48-hour callout response

    • 5-day SLA
    • Labour included
    • One preventative maintenance visit a year
  • Silver

    24-hour callout response

    • Everything in Bronze
    • 7-day SLA
    • Free annual water filter change

FAQs

Victoria Arduino servicing FAQs

Can't see your question? Call 01279 452110 or email support@modernstandardservice.com.

Contact the team

Do you repair Victoria Arduino coffee machines in London?

Yes. Our engineers work across London every day from our workshop in Harlow, Essex, and cover Essex, Kent and Surrey & Sussex. We also support customers across mainland Great Britain. Check your postcode.

Which Victoria Arduino machines do you service?

We service the Victoria Arduino range we sell, including the Eagle One, Eagle One Prima EXP and Mythos MY and MYG grinders. Running an older model? Tell us what you have and we'll confirm we can get the parts.

Do you use genuine Victoria Arduino parts?

Yes, wherever possible. We're an official Victoria Arduino partner and hold genuine spare parts at our Harlow workshop. Machines that need a boiler or group-head rebuild are pressure-tested before they go back to site.

How quickly can you get an engineer to my Victoria Arduino?

Silver and Gold plans include a 24-hour callout response, seven days a week. Bronze includes a 48-hour response, Monday to Friday. Not on a plan? Call 01279 452110 and we'll give you the next available slot.

Does my Victoria Arduino machine need a pressure vessel inspection?

Yes. Its boiler holds steam under pressure, so under the Pressure Systems Safety Regulations 2000 it needs a written scheme of examination and regular inspection by a competent person. We carry out PVIs for £420 + VAT, including the written scheme and certificate, and an annual PVI is included on our Gold plan. More about PVIs.

Is my old Victoria Arduino worth repairing?

It depends on the repair, the machine's condition and how often it's breaking down. Our repair or replace calculator shows what it's costing you, and our engineers will give you an honest answer.

Can you take over from my current service provider?

Yes, as long as your equipment is from a brand we service. Tell us when your current contract ends and we'll line our start date up with it. How switching works.

Book an engineer

Request a repair, service or quote

Tell us what's happening and we'll come back to you. Machine down right now? Calling is fastest.

  • La Marzocco, Nuova Simonelli, Victoria Arduino, Thermoplan, BUNN, Mahlkönig, Mazzer, Ditting, PUQpress and Übermilk
  • Bronze, Silver and Gold service plans
  • Engineers across London and the South East

Want to show us the problem? Send us photos of the fault.

We'll reply to confirm next steps. No obligation.

Not broken, just due?

Get a reminder when your machine needs its service

Every one of our service plans includes a preventative maintenance visit a year. Tell us your machine and roughly when it was last serviced, and we'll email you a month before the next one is due.

  • A reminder a month before it's due
  • Book it in by replying to the email
  • Unsubscribe any time

Where should we send the reminder?

Need help with your Victoria Arduino equipment?

Whether you are choosing a new machine, arranging installation or need support for existing equipment, our team can help.